JCW-CS13 Automatic 8mm Multi-conductor Cable Cut & Strip Machine

New! Focus on multicore cable, strip both layers, hot selling


Specialist in processing multicore cable

Offering a high-quality JCW-CS13 cable cutting and stripping machine, it is capable of processing multicore cable up to 8mm O.D, cutting and stripping both outer jacket and inner cores at one time perfectly. This updated cut and strip machine offers higher performance than the last generation. The JCW-CS13 cut & strip machine adopts a titanium coated cutter blade, which has 2 sharp cutting edges.  This cut & strip machine also can be used for single wire up to 16 mm². 

Thanks to 14 years of real manufacture capability, continuous improvement, and professional experience, JCW keeps offering professional solutions for a variety of multicore cables.  


Easy to use 

Each of the JCW-CS13 cutting and stripping machine comes with an English display, the display language is customizable. A user-friendly interface and 7" color touchscreen make the operation so accurate and simple. 

- The control with touch screen has an intuitive user interface for simple and safe operation.  

- The parameters such as wire cutting length, stripping length, wire diameter, speed, etc. can be accurately entered and stored for future recall at any time.  

- Data library saves 100 programs, you can name each one by a wish.

- Automatic one-touch calibration function for cutting length.

- Cable run-out sensor gives the machine a stop signal while the cable is used out. 

- Quickly change guide tubes and cutter blades. 

- Transparent safety cover with sensor


A variety of peripherals

- Wire unwind & pre-feed machine, load range from 15 to 200 KG 

- Robot arm controlled by CS13

- Cable stacker, 1 meter to 6 meters 

ModelJCW-CS13 Automatic Multi-core Cable Cutting and Stripping Machine
Function

Single wire, Multicore cable, Wire measuring, Cut into length, Full stripping, Partial stripping, Mid-stripping, Wire lack sensor, Length correction, Thermal transfer printer

Raw materialPVC, Teflon, Silicone, Low halogen, Fiberglass, etc
Cable size2 - 8 mm O.D.
Cutting length ( L )0.1 - 999999 mm
Cutting length accuracy
0.002 x L 
Single wireYES
Multi-core cableRound
Outer jacket stripping lengthLeading ( right ) side: 250 mm 
Trailing ( left ) side: 60 mm
Inner core stripping length30 mm at dual-ends
Production rate1500 pcs/h by 100mm wire length [ multi-layer stripping ]
Data library100 programs
Feeding unitBelt
Display7" color touchscreen, English / Chinese  [ other languages on request ]
Compatible peripheralsCable dereeler, robot arm, conveyor belt
Power supply
AC 110 - 220 V ± 10%, 50 / 60 Hz 
Air supply0.4 - 0.7 MPa ( clean and dry air )
DimensionsMachine: L 650 x W 560 x H 450 mm
Wire straightener: 350mm
Weight75 KG
CE-Conformity

Complies with CE equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.



* Must Be Filled

* Must Be Filled